BDWZF - LUBRICANT FLUOROCARBON TELOMER DISPERSION

Product Identification

Product ID:LUBRICANT FLUOROCARBON TELOMER DISPERSION
MSDS Date:01/01/1985
FSC:9150
NIIN:00-349-9290
MSDS Number: BDWZF

Responsible Party
CROWN INDUSTRIAL PRODUCTS COMPANY
STATE LINE ROAD
HEBRON, IL 60034
US

Cage: 92381

Contractor
CROWN INDUSTRIAL PRODUCTS CO
350 HEBRON, IL 60034 US

Telephone: 815-648-2424

Cage: 92381

Ingredients

FLUORO TELOMER DISPERSION

Fraction By Weight: 5.0%

ACGIH TLV: 1000PPM


CHLORINATED HYDROCARBONS

Fraction By Weight: <70%

ACGIH TLV: 350 PPM


ISOBUTANE/PROPANE(50/50) MIXTURE

Fraction By Weight: >25%

ACGIH TLV: 1000PPM

Hazards

Effects of Overexposure:INHALATION,DIZZINESS,SHORTNESS OF
BREATH,ANESTHESIA,POSSIBLE CARDIAC ARRHYTHMIAS

First Aid

First Aid:REMOVE TO FRESH AIR,GIVE ARTIFICIAL RESPIRATION IF NECESSARY,
AND CALL A PHYSICIAN.FLUSH EYES WITH WATER AND WASH SKIN WITH SOAP
& WATER.CALL A DOCTOR

Fire Fighting

Flash Point:<20F TOC
Extinguishing Media:CARBON DIOXIDE,DRY CHEMICAL,FOAM
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:TREAT AS CYLINDERS OF COMPRESSED GAS

Accidental Release

Spill Release Procedures:PROVIDE ADEQUATE VENTILATION.REMOVE ALL
SOURCES OF COMBUSTION,WIPE UP WITH INERT MATERIALS & PLACE IN
APPROPRIATE CONTAINER

Handling

Handling and Storage Precautions:DO NOT SPRAY INTO OR AROUND OPEN FLAME
AND SPARK.EXPOSURE TO HEAT OR SUNLIGHT OR WHERE TEMPERATURE EXCEEDS
120F MAY CAUSE BURSTING.AVOID CONTACT W/SKN
Other Precautions:USE ONLY AS DIRECTED,INTENTIONAL MISUSE BY
DELIBERATELY CONCENTRATING VAPORS AND INHALING CONTENTS CAN BE
HARMFUL OR FATAL

Exposure Controls

Ventilation:LOCAL EXHAUST
Protective Gloves:OPTIONAL
Eye Protection:ONLY UNDER CONDITIONS(SPY
Supplemental Safety and Health
ITEM IS TYPE I OF MILITARY SPECIFICATION

Chemical Properties

HCC:V3
Boiling Pt:B.P. Text:160F
Vapor Pres:50
Vapor Density:2.9
Spec Gravity:1.3314
Evaporation Rate & Reference:0.37
Solubility in Water:SLIGHT
Appearance and Odor:MILKY,ETHEREAL
Percent Volatiles by Volume:98.0

Stability

Stability Indicator/Materials to Avoid:YES
ALKALI EARTH METALS
Stability Condition to Avoid:OPEN FLAMES AND ELECTRICAL ARCS
Hazardous Decomposition Products:THERMAL DECOMPOSITION WILL YIELD
CO,CO*2,HALOGEN ACIDS,PHOSG

Disposal

Waste Disposal Methods:AEROSOL CONTAINER:DO NOT PUNCTURE OR INCINERATE
CAN.WHEN ALL LIQUID IS EXPELLED,CONTINUE TO DEPRESS BUTTON UNTIL
ALL GAS IS EXPELLED

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.